Home arrow Products
 
Menu navigation
Lnks


   
Six Component External Balance

1. XB6C-700-UN

Six Component External Balance Measuring forces and moment
of tested model in wind tunnel. Can be used for 2D or 3D or Half model

Specification dimension size
Width : 800 mm
Lenght : 800 mm
Height : 1390 mm

Typical Maximum Load of 2D/Half model
Lift : 1500 N
Drag : 50 N
Side force : 25 N
Pitching moment : 70 Nm
Rolling moment : 50 Nm
Yawing moment
: 10 Nm

 

 

2. XB6-1800-UN

Six Component External Balance Measuring forces and moment of tested model in wind tunnel. It's appropriate for 3D and 2D testing.

Specification dimension size
Turn table : 1800 mm
W x L : 1800 x 1800 mm
Height : 1600 mm
  ajustable to tunnel floor attitude
   
Typical maximum load o 3D model
Lift : 5000 N
Drag
: 5000 N
Side force : 5000 N
Pitching moment : 1000 Nm
Rolling moment : 1000 Nm
Yawing moment : 1000 Nm
   
Load accuracy : 0.1% Full Scale Angle
Angle  
3D/2DYaw angle : -45 to 45 deg in step of 0.1 deg
3D Pitch angle : -30 to 30 deg in step of 0.1 deg

 

Model Support and Positioning System For 3D model: Single strut or three point strut with fairing, equipped by a pitch rotation mechanism For 2D/Half model: model support is embedded in the turn table.

This balance is equipped with
- Data Acquisition and Control Software
- Check load and in-site calibration tool

 

 
 
Copyright © 2012 CHROMA. All right reserved